The Drum Closet

The Drum Closet

TRIGGERS

The viper bass drum trigger.

The viper was created with easy installation in mind.

Designed to be secured on a bass drum skin approx 11/2

inches in from the top of the outer rim and directly above the

beater. The in-line jack has a plastic clip for securing to the

outer sell, in order that the trigger can be left on the drum when

not in use.

The AR-T/S Snare&Tom Trigger. Head Only Blue.

The AR-T/S was designed for easy installation (no soldering or

drilling involved.) It should be secured on acoustic drum rim by

means of a tension bolt which should be through the trigger bracket

and through the rim and tensioned as normal. The in-line jack has a

plastic clip for securing to the drum when not in use.

The AR-Dual Zone Snare Trigger. Head and Rim Yellow

The AR-Dual Zone trigger was again designed for easy installation

the same as the AR-T/S trigger. Designed to pick up head&rim (picture available soon)

sounds simultaneously. The in-line jack has a plastic clip for

securing to the drum when not in use. The cable which is supplied

is a stereo 1/4 jack connector-2 1/4 mono jack connectors which

are colour coded as follows: Red = Head trigger and white = Rim

trigger.